Huck SF20 Bobtail Tool

Power Source: Huck POWERIG Hydraulic Unit

Hose Kits: Use only genuine HUCK Hose Kits rated

@ 10,000 psi working pressure.

Hydraulic Fluid: Hydraulic fluid shall meet DEXRON III, DEXRON VI, MERCON, Allison C-4 or equivalent ATF specifications. Fire resistant fluid may be used if it is an ester based fluid such as Quintolubric HFD or equivalent. Water based fluid shall NOT be used as serious damage to equipment will occur.

Max Operating Temp: 125 ° F ( 51.7 ° C)

Max Flow Rate: 2 gpm ( 7.6 l/m)

Max Inlet Pull Pressure: 7,000 psi, ( 483 bar)

Max Inlet Return Pressure: 5,000 psi, ( 345 bar)

Pull Capacity: 20,650 lbf ( 92 KN)

Return Capacity: 9,500 lbf ( 42 KN)

Stroke: 2.00 inches ( 5.08 cm)

Weights:

SFBTT20-DT = 8.5 lbs (3.85 kg)

SF20 = 11 lbs (4.99 kg)

Huck SF20 Bobtail Tool Manual